Changing The Factory Setting Of A Function Button On The Remote - Sony HT-K250 Mode D'emploi

Remote Operations
Button
CLEAR DVD player
SEARCH DVD player
MODE
TOP DVD player
MENU/
Satellite tuner Displays guide menu.
GUIDE
TV ?/1
TV
-/-- TV
TV VOL +/– TV
TV CH +/– TV
TV/VIDEO TV
SWAP* TV
JUMP TV
ALT Remote
* Only for Sony TVs with the picture-in-picture
function.
Notes
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
• To activate the buttons with orange printing, press
ALT first before pressing the buttons.
• Before you use the V/v/B/b button for this
system's operation, press MAIN MENU. To operate
other components, press AV MENU or TOP MENU/
GUIDE after pressing the function button.
Function
Press if you made a
mistake when you
press the number
button or press to
return to the
continuous play etc.
Select searching
mode. Press to select
the unit for search
(track, index, etc.).
Displays DVD title.
Turns the TV on or
off.
Selects the channel
entry mode, either one
or two digit.
Adjusts the volume of
the TV.
Select preset TV
channels.
Selects input signal:
TV input or video
input.
Swaps the small and
large picture.
Toggles between the
previous and the
current channels.
Change remote key
function to activate
those buttons with
orange printing.
Changing the factory
setting of a function
button on the remote
If the factory settings of the function buttons on
the remote do not match your system
components, you can change them. For
example, if you have a CD player and you do not
have a DVD player, you can assign the DVD
button to your CD player.
1
Hold down one of the function buttons
on the remote (VIDEO/DVD/SAT/TV/
AUX/TUNER) whose function you want
to change.
Example: Hold down DVD.
2
Press the corresponding button of the
component you want to assign to the
Function button.
Example: Press 1 (for CD player).
The following buttons are assigned to select
the functions:
To operate
CD player
VCR (command mode VTR 2*)
VCR (command mode VTR 3*)
DVD player
TV
DSS (Digital Satellite Receiver)
Tuner
* Sony VCRs are operated with a VTR 2 or 3
setting. These correspond to, 8mm and VHS
respectively.
To reset all the function buttons
to their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at the
same time.
Press
1
2
3
4
5
9
0/10
GB
25