FAS International Spirali HDR Mode D'emploi page 65

Spirali HDR Panzer - Issue 00
For example to associate to spiral 53 the price number 10, proceed as follows:
1. Go into programming mode to display .....................................................................................Command 00
2. Key in 05 and press B to display.......................................................................................... Selection No.00
3. Key in 53 and press B to display the present value of the parameter ............................................ No. price
4. Key in 10 and press RET.
Command 06 Setting the product code:
This command associates a product code of 4 figures to each selection. This code will then be sent to the
output RS232 together with the statistics of sale.
To associate a code to the products in selection 13, proceed as follows:
1. Go into programming mode to display ...................................................................................Command 00
2. Key in 06 and press B to display ................................................................................ Selection number 00
3. Key in 13 and press B to display ................................................................................... Product code 0000
4. Key in the wished code and press B.
Command 07 Displays sales for selection full price:
It enters the submenu to display the number of sales per spiral. "Selection No. 00" will appear on the
display. Key in the code which identifies the selection of which you wish to know the sales-data about. The
code is made of a No. with two figures: the first indicates the No. of the tray and the second the No. of the
spiral. For instance to identify the fifth spiral of the third tray you have to key in 35. Press push-button B and
the wished value will appear on the display. Press A to return to the submenu, from which you can display
the No. of sales pertinent to another spiral repeating the above mentioned proceeding. Press for the second
time A to return to the main menu.
For example to display the No. of sales completed at spiral 8 of tray 2, proceed as follows:
1. Go into programming mode to display .....................................................................................Command 00
2. Key in 07 and press B to display.......................................................................................... Selection No.00
3. Key in 28 and press B to display the wished value.........................................................................No. sales
4. Press B to display ................................................................................................................ Selection No.00
Command 08 Displays sales for selection discounted price:
Use this command to enter the submenu to display the number of sales per selection with full price. The
display shows 'Selection number 00'. Key in the code identifying the selection of which you want to know
the data of sales and press B to display the requested value. Press the pushbutton A to return to the
submenu from which it is possible to display the number of sales regarding another selection by repeating
the above said procedure. Press pushbutton A a second time to return to the main menu.
Command 09 Displays totals cashed not clearable:
Use this command to display the totals regarding the transactions carried out from the initialization of the
machine. The available data are the following: Total sold, tot. in counter, tot. in tubes, tot. banknotes, tot.
given back, tot. given out manually by the tubes, tot. cashed overprice, tot. discounted sales, tot. sales with
system cash less, tot. sold with exact amount, tot. cashed without sales, number of sales carried out, total
value of the free vends, total number of the free vends.
Command 10 Displays totals clearable:
This command has the same functions as command 09, but it can be cleared through command 92.
Command 11 Setting the selection sequences :
The function of this command is to set the dispensing of the same type of product in order to obtain a
uniform and progressive emptying of the tray, irrespective of the customer's choice.
Initially the command asks the operator to enable (option 1) or disable (option 0) the function.
If the option is active (1) the system asks the operator to enter the first selection that forms the sequence,
then asks the operator to assign a product code and price. Confirm each time by pressing ENTER. Add the
remaining selections that are part of the same sequence . Press ESC to conclude and confirm the first
sequence. At this point, another sequence may be entered, or exit the command by pressing ESC a second
time.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
19
E
N
G
L
I
S
H