FAS International Spirali HDR Mode D'emploi page 49

Spirali HDR Panzer - Issue 00
A Complete identification plate
B Identification plate
C Safety sticker indicating danger from rotating parts
D Safety sticker indicating surfaces at high temperatures
E Safety sticker indicating voltage supplied
F Disposal in accordance with EU directive 2002/96/EC
G Key removal warning sticker
The complete identification plate "A", which states all the machine data, is located inside the cabinet (see
diagram below). If there are any engraved details on the side of the cabinet, plate "B" is affixed to the rear of
the cabinet, in the top right corner.
Furthermore, the serial number is also printed on the most important element of the machine (fans,
compressor cards, etc...).
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
3
E
N
G
L
I
S
H