Battery Inspection - Benelli BN600R Manuel D'utilisateur

UK

BATTERY INSPECTION

To access the battery compartment:
1. Take out the passenger saddle us-
ing the wrench provided.
2. Pull the knob "A" to remove the
rider's seat.
3. Remove the 2 screws "B" fasten-
ing the battery lock bracket and re-
move the battery "C"
Cleaning the terminals
A
• Once the rider's seat has been re-
• After cleaning the terminals apply a
We recommend using Petronas Tutela
protection grease.
B
Turn the key to "
the battery.
When the battery is removed, the nega-
tive (Black) terminal must be disconnect-
ed before the positive one (red).
C
D
moved, check the condition of the
terminals "D" and "E".
are oxidised, remove the battery and
clean them with a metal brush.
light layer of grease before refitting
the battery.
NOTE:
" before accessing
104
when the battery is refi tted, the positive
pole must be connected fi rst.
Connect the nuts to the terminals.
Once the battery has been inspected,
refi t the saddle following the steps in re-
verse order.
E
Battery storage.
The battery tends to discharge if not
charged on a regular basis. When the
battery is completely fl at, chemical reac-
tions occur inside it that will damage it
irreparably.
If they
IMPORTANT NOTICE:
If the vehicle is not being used for more
than 15 days, the battery must be re-
moved, charged monthly and stored in
a cool, dry place. If the battery is left
on the vehicle, disconnect the negative
electrode (Black).
If the above precautions are not taken,
the battery becomes damaged,
This damage is not covered by guaran-
tee.
BN600R