Key; Ignition Block; Steering Lock - Benelli BN600R Manuel D'utilisateur

BN600R
• Switch off the engine with the gear
engaged and when the side stand is
lowered.

KEY

The bike is supplied with two keys for:
- opening the fuel cap

- steering lock

- ignition
- opening the back seat
IMPORTANT:
Always keep duplicate keys separately
from the bike

IGNITION BLOCK

The key block, in the centre of the vehi-
cle, has two main functions:
" " The engine and lights can func-
tion .
The key cannot be removed.
" " The engine and lights cannot
function .
The key can be removed.
IMPORTANT:
Never turn the ignition switch in position
while travelling, as this can cause acci-
dents.
It is advisable to apply an anti-freeze
for locks when the temperature reaches
around °0 to prevent the lock protection
hole from freezing.
85
STEERING LOCK
Lock the steering and remove the key
while parked to prevent any unauthor-
ised use of the vehicle.
Locking
1) Turn the handlebar completely to the
left.
2) Insert the key in the ignition.
3) Turn the key anticlockwise, in the
" " position to lock the steering.
NOTE:
To make it easier to engage the steering
lock, move the handlebar slightly while
turning the key.
4) Remove the key.
IMPORTANT:
After locking, try turning the handlebar
slightly to make sure that the steering is
actually locked.
Release
1) Insert the key in the steering lock.
2) Turn the key clockwise.
UK