Benelli BN600R Manuel D'utilisateur page 75

BN600R
or the operation of controls. Also make
sure that they do not obscure lights or
refl ectors.
• Accessories fitted on the handlebar
or in the fork zone can create instabil-
ity due to the uneven distribution of
weight or changes to aerodynamics.
When fitting accessories to the han-
dlebar or in the fork zone, remember
that they have to be as light as pos-
sible and in any case, reduced to a
minimum.
• Large or bulky accessories can se-
riously compromise the stability of
the motorcycle, due to aerodynamic
effects. The wind may try to lift the
motorcycle, or the motorcycle may
become unstable under the action of
cross winds.
This type of accessory may cause in-
stability, even when being overtaken or
when overtaking large vehicles.
• Certain accessories can move the
rider out of his or her normal riding
position. An incorrect position will
limit the rider's freedom of movement
and can compromise his or her ability
to control the bike. For this reason, fit-
ting such accessories is not advised..
Electrical accessories need to be added
with care. If electrical accessories ex-
ceed the capacity of the electrical sys-
tem of the motorcycle, this may cause
failures, which may in turn lead to dan-
gerous losses in lighting or engine pow-
er.
75
After market tyres and rims
The tyres and rims provided with the
motorcycle have been designed to work
with the bike's performance and to pro-
vide the best possible combination of
manoeuvrability, braking power, and
comfort. Different tyres and rims from
the ones supplied may not be suitable.
See the specifi c section for tyre speci-
fi cations.
UK