Outdoorchef Davos Serie Mode D'emploi page 38

CONNECTING THE GAS HOSE
CAUTION: Always use the spanner supplied to attach the gas hose to ensure the connection is sufficiently secure. For your safety, never tighten
the gas hose by hand to avoid any risk of barbecue fires.
Please refer also to the information in the separate assembly instructions for your barbecue.
LEAK TEST
WARNING: Ensure that no ignition sources are in the vicinity during the leak test. This also includes smoking. Never check for leaks with
a burning match or a naked flame, and always do this task outdoors.
1. The gas regulating knob must be in the position
2. Open the gas supply on the bottle and brush the soap-water solution provided or a home-made soap solution comprising 50% liquid soap
and 50% water onto all parts that carry gas (connection at the gas bottle / gas pressure regulator / gas hose / gas inlet / connection on
the valve). You can also use a leak spray.
3. Bubbles forming in the soap solution indicate that there are leaks.
IMPORTANT: Do not use the barbecue until all leaks have been eliminated. Turn off the gas supply at the gas bottle.
4. Eliminate the leaks by re-tightening the connections if possible, or else renew the defective parts.
5. Repeat steps 1 and 2.
6. Contact your specialist gas equipment retailer if the leaks cannot be eliminated.
NOTE: Carry out the LEAK TEST each time the gas bottle is connected or changed, and also at the start of the barbecue season.
.
38
OUTDOORCHEF.COM