Safety Instructions - Anslut 018817 Mode D'emploi

EN

SAFETY INSTRUCTIONS

• The product must be
connected to an earthed
power point.
• Keep power cords and
extension cords away from
cutting tools, sharp objects
and other potential risks,
such as wet floors and
solvents.
• Check at regular intervals all
electrical connections and
power cords for damage.
Rectify any faults before
using the light. Always have
the wiring and connections
checked by an authorised
electrician.
• Check that the mains voltage
corresponds to the rated
voltage on the type plate.
• Do not use the product in an
explosive environment, e.g.
near flammable liquids, gas
or dust. Do not use the
product near flammable
materials.
• Do not look directly into the
light source.
10
• Do not use the product if the
glass front is cracked or
damaged. The product must
be discarded if the glass front
is cracked or damaged.
• The light source is not
replaceable. The entire
product must be replaced if it
stops working.
• The external flexible cable or
cord of this luminaire cannot
be replaced; if the cord is
damaged, the luminaire
shall be destroyed.
• The minimum distance
between the product and an
illuminated object is one metre.
WARNING!
• The product gets very hot
when in use – risk of burn
injuries.
• Keep flammable materials
away from the product.
• Make sure there is enough
ventilation to prevent the
product getting too hot.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.