Safety Instructions - Anslut 019445 Mode D'emploi

SAFETY INSTRUCTIONS

• The product must be
connected to an earthed
power point.
• Keep power cords and
extension cords away from
cutting tools, sharp objects
and other potential risks,
such as wet floors and
solvents.
• Check at regular intervals all
electrical connections and
power cords for damage.
Rectify any faults before
using the lamp. Always have
the wiring and connections
checked by an authorised
electrician.
• Check that the mains voltage
corresponds to the rated
voltage on the type plate.
• Do not use the product in an
explosive environment,
e.g. near flammable liquids,
gas or dust. Do not use the
product near flammable
materials.
• Do not look directly into the
light source.
• Do not use the product if the
glass front is cracked or
damaged. The product must
be discarded if the glass front
is cracked or damaged.
• The light source is not
replaceable. The entire
product must be replaced if it
stops working.
• The minimum distance
between the product and an
illuminated object is one
metre.
WARNING!
• The product gets very hot
when in use – risk of burn
injuries.
• Keep flammable materials
away from the product.
• Make sure there is enough
ventilation to prevent the
product getting too hot.
EN
11