Safety Instructions - Anslut 019884 Mode D'emploi

EN

SAFETY INSTRUCTIONS

Read these instructions carefully before installation, and save
them for future reference.
• Always switch off the power supply before installation,
connection and service.
• The product must be connected to an earthed power supply
on installation.
• The product can be mounted on a surface of flammable
material.
• Check that the mains voltage corresponds to the rated
voltage on the type plate. Incorrect connection can result in
a risk of electric shock. The electrical installation should be
carried out by an authorised electrician.
• Never modify the product, this could result in serious
personal injury and will invalidate the warranty.
• A damaged power cord or plug must be replaced by an
authorised service centre or other qualified personnel to
ensure safe use.
• The product must be discarded if the glass front is cracked.
• The LED light source is not replaceable. When the light
source has reached the end of its useful life the complete
product must be replaced.
WARNING!
• This product becomes very hot during use – risk of burn
injuries. Keep flammable materials away from the product.
• Ensure good ventilation to provide adequate cooling for
the product.
18