Descaling The Brewing Head - Graef baronessa Mode D'emploi

• The edge remains red
until the process is
finished.
• Fill in fresh water. (If
there is still water in the
tank, pour it away).
• Turn the dial again after approx. 40 seconds.
IMPORTANT!
• In order to stop the decalcification process or to refill the water, press the P
button. To resume, press the P button again.
• To cancel the descaling process, press the P key for approx. 3 sec.
Keep standing at the unit during the descaling process.

DESCALING THE BREWING HEAD

• Take out the group handle, water tank and collection tray.
• Put the machine on its back side.
66
• Turn off the control
knob again. Units heats
up.
• The unit is ready for
operation.
• Pour the descaling
mixture out of the vessel
and place this vessel
under the steam distrib-
utor.
• Turn on the control
knob.