Explanation Of The Descaling Function; Descaling The Brewing Head - Graef Marchesa ES 850 Instructions D'utilisation

EXPLANATION OF THE DESCALING FUNCTION

• Descaling brewing unit.
DESCALING HOT-WATER / STEAM LANCE
• Remove the water tank and fill 1.7 liters of fresh water.
• Add two decalcifying tablets to the water tank.
• This takes about 5 minutes to dissolve in the water.
• Place a large container under the steam distributor.
• Press the P button.
• Press the + button until
• Acknowledge with P button.
• Press the + button.
• The right edge is lit, acknowledge with P button.
• 2 beeps confirm the descaling process.
• Turn on the control knob.
• The decalcification process can take a few minutes.
• The edge remains red until the process is finished.
• Turn off the control knob again. Units heats up.
• Pour the descaling mixture out of the vessel and place this vessel under the
steam distributor.
• Fill in fresh water. (If there is still water in the tank, pour it away).
• Turn on the control knob.
• Turn the dial again after approx. 40 seconds.
IMPORTANT!
• In order to stop the decalcification process or to refill the water, press the P
button. To resume, press the P button again.
• To cancel the descaling process, press the P key for approx. 3 sec.
Keep standing at the unit during the descaling process.

DESCALING THE BREWING HEAD

• Take out the group handle, water tank and collection tray.
• Put the machine on its back side.
• Descaling hot water
lance.
.
DE
EN
FR
NL
ES
IT
DK
41