Cleaning The Brew Assembly (Backwash) - Graef baronessa Mode D'emploi

• The edge remains red
until the process is
finished.
• Fill in fresh water. (If
there is still water in the
tank, pour it away).
• After approx. 40 seconds, turn the knob off again.
IMPORTANT!
• In order to stop the decalcification process or to refill the water, press the P
button. To resume, press the P button again.
• To cancel the descaling process, press the P button for 3 sec.
Insert a new water filter cartridge into the water tank.

CLEANING THE BREW ASSEMBLY (BACKWASH)

We recommend to carry out backwashing once a week.
Only Use Graef cleaning tablets which are especially matched to our appliances.
70
• Turn off the control
knob again. Units heats
up.
• The unit is ready for
operation.
• Pour the decalcification
mixture out of the vessel
and place this vessel un-
der the hot waterlance.
• Turn on the control
knob.