Identification - Rating Plate - Arneg BADEN 90 SELF Manuel D'instructions Et D'utilisation

Baden
English
EMC Electromagnetic compatibility
2014/30/EU
RoHS RoHs Directive 2011/65/EC
(restricted use of certain
hazardous substances in electrical
and electronic equipment)
Ecodesign and Directive 2009/125/EC
Regulation implementing EU
Energy label-
2019/2024
ling
(ecodesign specification for
refrigeration appliances with
direct sales function)
Compliance with the requirements and standards are present in the generic facsimile of
i
the Declaration of Conformity at the end of this manual.
These models are excluded from the scope of the Directive 2014/68/EU in accordance
with article 4 paragraph 3 (and/or article 1 paragraph 2 letter f).
The performance of these refrigerated counters was determined through tests conducted in
compliance with the standard
correspond to climatic class 3 (25°C, 60% R.H.) see table:
Climatic Class of the
testing chamber
0
1
2
3
4
6
5
7
8
The weight of water vapour in dry air is one of the main points that affect the performance and
power consumption of the counters.
The safety test is carried out in accordance with standards IEC EN 60335-2-89 at an ambient
temperature of 32°C +/-2°C.
Declaration of
conformity

6. Identification - Rating Plate

The serial plate with all the technical specifications (Fig. 2) is affixed to the side of the cabinet:
N°
1 name and address of the manufacturer
2 name and length of the cabinet
3 code of the cabinet
serial number of the cabinet
4
5 supply voltage
6 power supply frequency
7 operating current consumption
8 operating electrical power absorbed in the refrigeration phase (fans+hot wires+lighting)
26
EN ISO 23953-2: 2016
Temperature
dry bulb
°C
20
16
22
25
30
27
40
35
23,9
A copy of the conformity statement is annexed to the counter.
If the original copy of the Declaration of Conformity supplied with the unit is
lost, download a copy by filling out the form found in the footer of the home
page of the website www.arneg.it under "EU compliance".
EN 61000-3-2: 2019;
EN 61000-3-3: 2020;
EN 61000-3-11: 2020;
EN 55014-1: 2019;
EN 55014-2: 2016
EN 50581: 2012
EN ISO 23953-2: 2016
in the environmental conditions that
Relative
Humidity point
%
50
80
65
60
55
70
40
75
55
Trade
Electromagnetic
Compatibility Regulation
2016.
Regulations 2012
(restricted use of certain
hazardous substances in
electrical and electronic
equipment).
Ecodesign for energy-
related products and
energy information.
2010 Standards as
reflected in UK law and
subsequent
modifications.
Dew Weight of water
vapour in dry air
g/kg
°C
9,3 7,3
12,6 9,1
15,2 10,8
16,7 12,0
20,0 14,8
21,1 15,8
23,9 18,8
30,0 27,3
14,3 10,2
05060141 01 05-2022