Maintenance / Disposing; Gear Box Maintainance; Energy Saving Tip; Checking The Oil Level - Intimus 16.86 SmartShred Instructions D'opération

GB
8

Maintenance / Disposing

8 .1 Gear box maintainance

DANGER!
Risk of injury from electric shock and moving
parts!
Before opening the housing, switch off the ma-
chine at the main switch and unplug the mains
plug.
NOTE!
The machine may not be modified in any way!
Operation of the machine is prohibited if modifica-
tions are undertaken!
Both synchron gears, as well as the chain wheels and drive
chains must be greased monthly.
Proceed as follows:
1 . Remove the right-hand side panel from the housing.
2 . Grease the above mentioned parts with a brush or a gre-
ase gun, and a standard, commercially available grease.
3 . Re-install the side cover and connect the machine to
the mains. The machine can be put back into operation.

8 .2 Energy saving tip

Be certain that the machine is turned off overnight (main
switch (fig. 7/2) switched to „0").

8 .3 Checking the oil level

Unscrew the dipstick (fig. 23/1) in order to check the oil le-
vel. The marking on the dipstick must be wetted with oil. If
this is not the case, add oil.
1 Oil dipstick
fig. 23 Check oil level baler

8 .4 Disposing of the machine

Dispose of the machine in an environmentally
sound fashion at the end of its useful service life.
Do not dispose of any of the parts included in the
machine or its packaging with household trash.
94710 1 02/18
9
Description
Plastic sac, 600 x 490 x 1500 x 0,06 mm
Bottle of oil, 2 l
Strap roll, 8 mm / 500 m

10 Technical data

Shredder
Cutting size:
Cutting capacity
10 x 70 mm:
6 x 50 mm:
Working width:
Power:
Weight:
Baler
Press force:
Power:
Chamber space:
Inlet opening:
Machine weight:
Bale weight:
Bale size:
Combination
Supply voltage:
Pre-fusing:
1
(gl fuse,
000209
type 1 assignment)
Length:
Width:
Height:
Length with open dis–
charge flap:
Noise level:
Overall weight:
(shredder+baler)

Accessories

NOTE!
Please contact your dealer when ordering accesso-
ries and replacement parts.
10 x 70 mm
6 x 50 mm
(in zwei Stapeln)
470 - 520 sheets (70g/m2)
300 - 330 sheets (70g/m2)
500 mm
11,5 kW
approx. 726 kg
approx. 8 t
4 kW
570 x 460 x 1000 mm
570 x 340 mm
approx. 530 kg
approx. 60 - 80 kg
500 x 600 x 750 mm
400 V/50 Hz, 415 V/50 Hz, 200 V/50 Hz
230 V/50 Hz, 220 V/60 Hz,
200 V/60 Hz
400 V - 415 V/50 Hz = 35 A
220 V - 230 V/50 Hz = 40 A
200 V/50 - 60 Hz = 63 A
2850 mm
1200 mm
1550 mm
3480 mm
approx. 61 dB (A)
approx. 1256 kg
16.86 SmartShred
Order-No .
99969
91869
80661
27