Additional Operating Instructions - Inogen ONE G3 Mode D'emploi

Additional Operating Instructions

For Use In Home with AC Power
For operation of the power supply using an AC power source, follow these instructions:
1. Connect the AC input to the power supply.
2. Connect the AC power plug to the power source and connect the power output plug
to the Inogen One® G3. The green LED will be illuminated, indicating the
power supply has input power.
Traveling with your Inogen One® G3 System
The Inogen One® G3 System makes travel by boat, car or train more convenient for oxygen
users than ever before. Now you get the same quality performance and convenience
while on the go that you're used to receiving from your Inogen One® G3 at home.
Here are some useful and important instructions for maximizing performance and
convenience when using your Inogen One® G3 while traveling.
You should begin planning for a trip with a checklist of items to remember. This checklist
should include:
✓ AC power supply and DC power cable
✓ Extra Battery(s) if required
✓ Important phone numbers, such as those of your physician and home healthcare
provider, or providers in the area you will be traveling
✓ Plan for backup oxygen in the event of a prolonged power outage or
mechanical failure
For Use In Automobile/RV/Boat/Aircraft
For operation using a DC power source, follow these instructions:
1. Connect the DC power output plug to the Inogen One® G3.
2. Connect the DC power plug (Cigarette Lighter Adapter) to
the power source.
3. The plug should insert into the socket without excessive
force and securely remain in place.
Operating Instructions Chapter 3
15