Siemens SITRANS TH Notice De Service page 10

3.2 Mounting SITRANS TF
①
Cover with inspection window
②
Display module (digital display)
③
Cable gland for auxiliary power
supply/analog output
④
SITRANS TF field housing
⑤
Spacers
Figure 3-3 Design of SITRANS TF with display module (digital display)
Procedure
1. Unscrew the front cover
2. Screw the two spacers
3. Remove the left-hand shorting bars on the PC board located under the transmitter.
4. Insert the plug-in connector from the display module. The plus side with the red wire must face upward.
10
⑥
⑦
⑧
⑨
①
.
⑤
into the right and left threads. Torque approx. 3 Nm.
Plug-in connector from SITRANS TH200 or TH300
Ex nameplate
M4 screw
Cable gland for sensor cable
SITRANS TH/TR/TF
A5E32363963-02, 09/2021