Panasonic LF-M621U Mode D'emploi page 46

ENGLISH
Displaying the software menu
1
Insert the supplied CD-ROM into this drive.
The installation program starts automatically.
•
If the installation program does not start automatically, start it manually by following the pro-
cedure below.
(This assumes that the drive letter assigned to this drive for CD-ROM media is E:.)
From the Start menu select [Run].
In the "Open" box, enter "e:\setup.exe".
Click [OK].
The installation program starts.
2
After the following window is shown, click on the button of the software
you want to install.
46