Panasonic LF-M621U Mode D'emploi page 144

ENGLISH ENGLISH
To remove discs from TYPE2 cartridges
Push out and remove the cartridge's locking pin
with a pen or similar object.
Use a pointed object to press on the latch in the
hole on the left side and open the cover.
Remove the disc horizontally, taking care not to
soil or damage the disc.
When storing discs
•
Match the label side of the disc with the label side of the cartridge and insert fully.
•
Check the setting of the write-protect switch after closing the cover.
Handling precautions
•
Do not try to open the cover by force.
•
Do not insert discs other than DVD-RAM into empty cartridges.
•
Take care that the disc's recording surface is not contaminated with fingerprints, dirt, dust, scratches,
or liquids. Do not write on the recording surface.
•
Write on the label side of the disc only with a soft, oil-based felt pen. Do not use ballpoint pens or
other hard writing implements.
•
Do not attach other labels or protective covers. Do not use coatings.
•
Clean the disc with the special DVD-RAM/PD disc cleaner, part number LF-K200DCA1 and the
cleaning liquid. Do not use benzine, thinners, anti-static fluids, or any other solvent.
•
Return discs to their cartridges when you are not using them.
•
Do not drop or bend discs.
144
Label side