Solving Windows Installation Problems - HP deskjet 990c Guide De Référence Rapide

solving Windows installation problems

View the information in this section if you have problems setting up your printer. If you
need help after the printer is set up, see the quick help electronic manual.
what is the problem?
I inserted the installation CD,
but the computer could not
read it.
12
possible causes...
• The CD is not properly inserted in the CD-
ROM drive
• The CD is damaged
• The CD-ROM is damaged
to solve the problem...
Reinsert the CD into the CD-ROM drive. Be
careful to position the CD correctly.
If installation does not begin after a few
seconds, either the CD or CD-ROM drive may
be damaged.
Insert a different CD in the CD-ROM drive.
If another CD works, you may have a damaged
CD.
If you are not able to play any CD, you may
need to replace or repair your CD-ROM drive.
Replace the damaged CD by downloading the
printer software (also known as the printer
driver) from the HP Website.
If you do not have Web access, contact HP
customer care to order the software on CD.
For the phone number of the HP customer care
center nearest to you, see "contacting hp
customer care".