Handling - Gaspardo PINA 400 Emploi Et Entretien

1.5 HANDLING

The Customer must apply the rules envisaged in the European Directives EEC 391/89 and 269/90 and subsequent modifications
on the possible risks for loading and unloading operators caused by manual handling of loads.
During handling operations wear suitable personal protection equipment:
If the machine is handled, it must be lifted by hooking onto the appropriate holes (A-B) (Fig. 2) with a suitable winch or crane of
sufficient capacity. Because of the danger involved, this operation should be carried out by trained and responsible personnel.
The mass of the machine is on the identification Plate (Fig. 1).
Stretch the rope to keep the machine level.
The hook points can be detected by finding the «hook» symbol (9 Fig. 4).
B
• Packaging materials (pallets, cartons, etc.) must be disposed of as prescribed by the existing regulations through authorised
disposal companies.
• Parts making up the machine must not be lifted by hooking them up from moving or weak parts such as guards, electrical
runways, pneumatic parts, etc.
• Standing under suspended loads is not allowed; unauthorised personnel are not allowed access to the work sites; it is
mandatory to wear overalls, safety footwear, gloves and a hardhat.
cod. G19503360
USE AND MAINTENANCE
ATTENTION
Overalls Gloves
A
B
A
ATTENTION
g
Shoes Hardhat
A
ENGLISH
B
B
fig. 2
41