Product Description; Trim Tab Description; Operation - Ultraflex UFLEX Manuel D'installation Et D'entretien

1 PRODUCT DESCRIPTION

1.1 Trim tab description

The use of the tabs allows the boat to maintain an
adequate trim according to the different navigation
conditions, optimizing the performance. If necessary
(Pict.1), the tab drive rectifies and rebalances the boat
trim (Pict. 2), ensuring a higher motor efficiency and
speed, a considerable fuel saving and navigation safety.
The tabs fixed to the lower edge of the transom act as a
movable extension of the boat hull, increasing the
stability in several conditions.
Their working principle is the following: the water, flowing
on the tab surface, causes the stern lifting as the tab is
lowered. According to this principle, it is possible to
change the tab lowering up to reaching a trim that can
ensure an optimal performance for each situation.
The trim tabs described in this manual are made up of:
1 1 1 1 1
Actuator
2 2 2 2 2
Connection bracket to the transom
Electric cable (2 m)
3 3 3 3 3
4 4 4 4 4
Connection bracket to the tab
5 5 5 5 5
Tab + hinge
6 6 6 6 6
Easy-Joy - Control system

1.2 Operation

The joystick allows an easy use of the Trim Tab system.
Thanks to this control system, the user can focus on the
boat trim, regardless of the tab position.
The electromechanical actuators (2) that allow changing
the inclination angle of tab (3) are controlled by means of
Easy-Joy Easy-Joy Easy-Joy Easy-Joy (1) that is located on the dashboard or on the Easy-Joy
upper station.
Easy-Joy Easy-Joy Easy-Joy Easy-Joy function description: Easy-Joy
- By jogging the lever forward, the boat bow goes down;
- By jogging the lever backward, the boat bow goes up;
- By jogging the lever rightward, the boat tilts to starboard
- By jogging the lever leftward, the boat tilts to port
When running at idle or when the engine turns off, the electronic system enables the AUTO LINE-UP function
automatically. It allows putting the tabs in rest position.
page 6
of 79 -
ELECTROMECHANICAL TRIM TABS
Installation and maintenance manual
1 1 1 1 1
2 2 2 2 2
2 2 2 2 2
1 1 1 1 1
4 4 4 4 4
3 3 3 3 3
6 6 6 6 6
5 5 5 5 5
1 1 1 1 1
2 2 2 2 2
3 3 3 3 3