Residual Risks; Technical Data - Scheppach BPT700-40Li Traduction Des Instructions D'origine

m Warning! This electric tool generates an electro-
magnetic field during operation. This field can im-
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.
Battery
Vapours may leak out in case of unauthorised use or
when using a damaged accumulator. Bring fresh air
and seek medical advice if experiencing difficulties.
Vapours may irritate the respiratory system.
m Risk of fire! Risk of explosion!
Never use damaged, defective or deformed accumu-
lators. Never open or damage the accumulator or let
it fall on the ground.
Never charge the battery in an environment with ac-
ids and easily flammable materials.
Protect the battery against heat and fire.
Battery to be used at the ambient temperatures be-
tween 10°C and +40°C only.
Never put the battery on heaters and do not expose
it to strong sunlight for a long time.
After being subject to heavy load, let the battery cool
down first.
Short circuit - do not bridge the accumulator contacts
with metal parts.
The accumulator must be packaged (plastic bag,
box) or accumulator contacts must be sealed up for
accumulator disposal, transport or storage.

Residual risks

Even when the device is used properly and all safe-
ty regulations are complied with, there still may be
some residual risks.
• Cutting injury
• Hearing damage
A longer stay in the immediate vicinity of the run-
ning unit may cause hearing damage. Wear ear
protectors!
• Damage to health arising from vibrations to hand
and arms if the device is used for a long time or if
the device is not guided and evaluated properly.
• Vibration dampening systems do not guarantee
protection against Raynaud syndrome or carpal
tunnel syndrome. For this reason, the condition of
the fingers and the wrist must be thoroughly moni-
tored in case of regular, continuous use of the de-
vice. If symptoms of the illnesses indicated above
occur, contact a doctor immediately. To reduce the
risk of Raynaud syndrome, keep your hands warm
while working and take breaks at regular
Despite the observance of the operating instructions
there still may be some hidden residual risks.

6. Technical data

Cutter bar length
Max. Cutting length
Chain pitch
Chain thickness
Sprocket wheel
Cutting speed at rated rpm:
Oil tank capacity
Saw chain
Cutter bar
Max. cutting length
Tooth spacing
Cuts
Cutting Diameter max.
Sound and vibration
Sound and vibration values were measured in ac-
cordance with ISO 22868.
L sound pres-
pA
sure level
K
WA
L sound power
WA
level measured
K
WA
L
WA
level guaranteed
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with ISO 22867.
Vibration emission
value a
K uncertainty
The specified vibration value was established in ac-
cordance with a standardized testing method. It may
change according to how the electric equipment is
used and may exceed the specified value in excep-
tional circumstances.
The specified vibration value can be used to com-
pare the equipment with other electric power tools.
The specified vibration value can be used for initial
assessment of a harmful effect.
intervals.
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect work-
ing order.
Pole Saw
Oregon 080SDEA318
Hedge Trimmer
Hedge Trimmer
- dB(A)
uncertainty 3 dB(A
86.5 dB(A)
uncertainty 3 dB(A
sound power
102 dB(A)
Hedge Trimmer
2.87 m/s
h
1.5 m/s
8" / 240 mm
200 mm
3/8" (9,525mm)
1.3 mm
6 Teeth, 3/8"
8,8 m/s
0.065 l
Oregon 91P033X
410 mm
24 mm
1400 /min
24 mm
Pole Saw
- dB(A)
3 dB(A)
88.9 dB(A)
3 dB(A)
102 dB(A)
Pole Saw
1.635 m/s
2 2
1.5 m/s
2 2
GB 27