Proper Use - Scheppach BPT700-40Li Traduction Des Instructions D'origine

Unpacking
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!

4. Proper use

The equipment is to be used only for its prescribed pur-
pose. Any other use is deemed to be a case of misuse.
The user / operator and not the manufacturer will be
liable for any damage or injuries of any kind caused as
a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for equiv-
alent purposes.
Hedge trimmer
The hedge trimmer mounting kit is allowed to be used
only on the supplied motor head.
Caution! This hedge trimmer is suitable for cutting
hedges, bushes and shrubs. Caution! Do not use this
equipment to cut grass.
Pole-mounted pruner (chainsaw with telescopic
handle)
The chain saw mounting kit is allowed to be used only
on the supplied motor head.
The chainsaw with telescopic handle is designed for
lopping off tree branches. It is not suitable for exten-
sive sawing work, felling trees or sawing any materials
other than wood.
5. Safety instructions
General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may re-
sult in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term „power tool" in the warnings refers to your
mains-operated (cordepower tool or battery-operated
(cordless) power tool.
24 GB
1. Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes
• Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
2. Electrical safety
• The electrical tool's connection plug must fit
into the socket. The plug may not be modified
in any way. Do not use an adaptor plug togeth-
er with earthed electric tools. Unmodified plugs
and suitable sockets reduce the risk of an electric
shock
• Avoid body contact with earthed surfaces,
such as pipes, heaters, ovens and refrigera-
tors. There is an increased risk of electric shock
if your body is earthed.
• Keep electric tools away from rain and mois-
ture. Water entering an electric tool increases the
risk of an electric shock.
• Do not use the cable for another purpose, for
example, carrying or hanging the electric tool
or pulling the plug out of the socket. Keep the
cable away from heat, oil, sharp edges or mov-
ing device parts. Damaged or coiled cables in-
crease the risk of an electric shock.
• If you work with an electric tool outdoors, on-
ly use extension cables that are also suitable
for outdoor use. Using an extension cable suit-
able for outdoor use reduces the risk of an elec-
tric shock.
• If you cannot avoid using the electrical tool in
a wet environment, use a fault-current circuit
breaker. Using a fault-current circuit breaker re-
duces the risk of an electric shock.
3. Personal safety
• Be alert, be careful what you are doing, and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while op-
erating power tools may result in serious personal
injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.