Kärcher TB 36 Notice Originale page 32

1 Menu item
2 Parameter
Select the parameter you want to set
 Select the menu item with the buttons
LEFT and RIGHT.
 Press OK to open the parameter group.
 Use the LEFT and RIGHT buttons to
select the paramater you want to set.
Set the parameter with a variable
 Press the OK button.
The selectable variable blinks.
 Use the LEFT and RIGHT buttons to
select the variable value.
Press and hold the button for a swift
change of the variable.
 Press the OK button to save the select-
ed value.
or
Press ESC to abort the change.
Settng a parameter with several varia-
bles
 Press the OK button.
The selectable variable blinks.
 Use the LEFT and RIGHT buttons to
select the variable value.
 Press OK briefly to save the value and
to jump to the next variable.
 Press the OK button for more than 1
second to save set values.
or
Press ESC to abort the change.
Exiting the menu
 Press the ESC ro return to the next
higher menu.
32
Speed selection
Here you can select the gantry speed for
the individual program sections.
Program section
Foam
Intensiv
HD-HD roof
HP side c.
Car
Transp.
Bus
Truck
Tanker
Rinsing
Setting selection
FW emergency mode No:
If the processed water supply is used up,
the running wash is continued with fresh
water. After the wash is completed, the sys-
tem switches to a non-operational state.
FW emergency mode Yes:
If the processed water supply is used up,
the washing operation is continued with
fresh water. The system remains ready for
operation, a message will be displayed.
6
-
EN
Date / time selection
Setting date, time and summer/winter time
change
Auto summer / winter time = YES:
Setting range
Automatic change active. Summer time
30%...150%
(daylight saving time) begins on the last
30%...150%
sunday in March at 2:00 o'clock. Winter
30%...150%
time (normal time) begins on the last sun-
day in October at 3:00 o'clock.
30%...150%
Auto summer / winter time = NO:
30%...120%
No automatic time change.
30%...120%
Operating time selection
30%...120%
The plant is open during the operating time.
30%...120%
The plant is locked outside the operating
30%...120%
time.
30%...150%
24 hours open: Set beginning and end of
the operating time to the same value.
24 hours closed: Set the end of the oper-
ating time to an earlier value than the be-
ginning of the operating time
Selection of variable public holidays
Variable public holidays are on different
days every year. They must newly be set
every year.
On the set public holidays the operating
time selected for public holidays applies.
Note
Set the date to 00.00.00 for unused public
holidays.
Selection of fixed public holidays
Fixed public holidays are on the same day
every year.
On the set public holidays the operating
time selected for public holidays applies.