Location And Function Of Parts; Front Panel - Sony DSR-11 Mode D'emploi

Location and Function of Parts

Location and Function of Parts

Front Panel

2 Indicators
(see page 10 (GB))
5 ON/STANDBY
switch
4 Remote sensor
3 INPUT SELECT selector
2 REMOTE CONTROL switch
1 Cassette lid
To insert/eject a cassette, open the lid.
For details of usable cassettes, see "Notes on Video
Cassettes" on page 15 (GB).
2 REMOTE CONTROL switch
Selects whether the unit is operated from the Remote
Commander or from an optional remote control unit.
WIRELESS: The unit is operated from the Remote
Commander.
CONTROL S: The unit is operated from a remote
control unit (the DSRM-20, not supplied),
connected to the CONTROL S jack on the rear
panel.
Note
You can operate this unit from its front panel
regardless of this switch setting.
8
(GB) Chapter 1 Overview
3 INPUT SELECT selector
You can select DV, S VIDEO, or VIDEO to input the
signals.
DV: Signal input from the DV IN/OUT connector
S VIDEO: Signal input from the S VIDEO connector
on INPUT jacks
VIDEO: Signal input from the VIDEO jack on
INPUT jacks
Note
Do not change the selector setting during recording.
Otherwise, noise is output to the picture and sound and
that portion will not be recorded properly.
4 Remote sensor
5 ON/STANDBY switch
1 Cassette lid
1 Tape transport
control section
(see page 9 (GB))