Sony DSR-11 Mode D'emploi page 21

Connecting to another VCR
The video and audio signals are sent to another VCR with virtually no
deterioration in quality, enabling high-quality recording. The signal flow is
automatically detected so you do not need to make separate connections
for input and output.
Recorder
Other VCR
to the
to the
DV jack
LANC jack
LANC cable (not supplied)
i.LINK cable (DV cable) (not supplied)
Notes
• Set DV EE OUT on the VTR SET menu to OFF.
For details on the VTR SET menu, see "VTR SET menu" on page 43 (GB).
• With the DV connection, the sound is recorded in the same audio
recording mode as that of the source tape. To record in a different audio
recording mode from the source tape, use the analog connection instead.
• With the DV connection, data codes (recording date/time, camera data)
recorded on the source tape are transmitted from this unit (player). As a
result, when you play back a recorded tape on this unit and press the
DATA CODE button on the Remote Commander, the same data codes
recorded on the source tape are displayed on the monitor screen.
• As for the LANC connection, see "Notes for a LANC connection" on the
next page.
Monitor
Chapter 2 Playback and Recording
Player
DSR-11
l: Signal flow
21
(GB)