Preparations; Power Preparations; Inserting/Ejecting Cassettes - Sony DSR-11 Mode D'emploi

Preparations

Power Preparations

Inserting/Ejecting Cassettes

To insert a cassette
Connect the power cord (supplied) to the AC adaptor (AC-SU1, supplied)
and connect the AC adaptor to the DC IN 12V connector on the unit. Then,
connect the power plug to the wall outlet.
When you undo these connections, be sure to disconnect the power cord
from the wall outlet first.
DSR-11
to wall outlet
Notes
• Do not insert the cassette forcibly. The unit may be damaged.
• Do not eject/load the cassette in a place subject to light. Make sure to
close the cassette lid when using the unit. The internal sensor of the unit
may operate incorrectly if too much light finds its way into the unit.
1
With the unit powered on, confirm that the q indicator is off, then
open the cassette lid.
to DC IN 12V
connector
AC adaptor
AC-SU1 (supplied)
Power cord (supplied)
Chapter 2 Playback and Recording
(Continued)
17
(GB)