Sony DSR-11 Mode D'emploi page 47

Submenu
Icon/Menu
(page)
CM SET
TAPE LABEL 3 Repeat steps 1 and 2. After entering all characters for the tape label, select [SET].
CM
ITEM ERASE Erases a cassette memory item.
Setting
Note
The unit cannot display the TAPE LABEL screen in the following cases:
• The unit does not have a tape inserted or the tape is being unloaded.
• The tape does not have cassette memory.
• The cassette memory is full of data other than the tape label data.
• The tape is write-protected.
• The tape is being recorded.
• The cassette memory is being used.
If you select this item, one of the following symbols appears. If no cassette is loaded,
nothing is displayed.
: Tape with cassette memory
: Tape without cassette memory
The available items are as follows:
INDEX ALL: Erases the index data.
TITLE ALL: Erases the title data.
DATE ALL: Erases the date data.
PHOTO ALL: Erases the photo data.
You can erase an item as follows:
1 Select an item to erase by pressing the M/m and SET buttons.
2 To erase the item, select OK, otherwise select RETURN. (If you select OK, the unit will
check again to see if you really want to erase the item.)
CM SET
I TEM ERASE
VTR
A I NDEX ALL RETURN
T I T LE ALL OK
DISP
DATE ALL
CM
,
PHOTO ALL
ETC
RETURN
[MENU] : END
3 To erase the item, select EXECUTE, otherwise select RETURN. (If you select
EXECUTE, the ERASING message will flash, and the unit will start erasing the item in
the cassette memory. While the ERASING message is flashing, you cannot use the M/m
or SET buttons. After the item has been erased, the COMPLETE message appears.
Press the M/m button to erase the COMPLETE message.)
CM SET
VTR I TEM ERASE
I NDEX ALL ERASING
A
DISP T I TLE ALL
DATE ALL
CM
,
PHOTO ALL
ETC
RETURN
[MENU] : END
Notes
• You cannot make a title, mark the date for date search, or record in the photo mode with
this unit.
• You cannot erase an item in the cassette memory in the following cases:
– The unit does not have a tape inserted or the tape is being unloaded.
– The tape does not have cassette memory.
– The tape is write-protected.
– The tape is being recorded.
– The cassette memory is being used.
CM SET
I TEM ERASE
VTR
I NDEX ALL RETURN
A
T I TLE ALL OK
DISP
DATE ALL
CM
,
ETC PHOTO ALL
RETURN
[MENU] : END
CM SET
VTR I TEM ERASE
I NDEX ALL COMPLETE
A
DISP T I TLE ALL
DATE ALL
CM
PHOTO ALL
ETC
RETURN
[MENU] : END
Chapter 3 Adjusting and Setting Through Menus
CM SET
I TEM ERASE
VTR
I NDEX ALL RETURN
A
DISP T I TLE ALL EXECUTE
DATE ALL
CM
PHOTO ALL
ETC
RETURN
[MENU] : END
(Continued)
47
(GB)