Auto Repeat - Sony DSR-11 Mode D'emploi

Playback

Auto Repeat

32
(GB) Chapter 2 Playback and Recording
This unit can repeat the playback of all or a part of the tape.
1
Set the AUTO REPEAT switch on the rear panel to ON.
2
Press the REW button. (If the tape is already rewound, press the PLAY
button.)
The unit rewinds the tape to its beginning, and starts playback
automatically. The unit repeats the playback from the beginning to the
first index (if there is no signal for index search on the tape, to the next
unrecorded portion; if there is no unrecorded portion, to the end of the
tape).
Auto Repeat using an external AC timer
If you connect an external AC timer (not supplied) to this unit, you can
repeat playback automatically at the preset time.
1
Connect an external AC timer (not supplied) to this unit.
DSR-11
AC timer
2
Set the AUTO REPEAT switch on the rear panel to ON.
3
Set the starting time on the external AC timer.
At the preset time, the power of this unit turns on, and after a few
seconds (no more than 30), Auto Repeat playback starts automatically.
The unit repeats the playback from the beginning to the first index (if
there is no signal for index search on the tape, to the next unrecorded
portion; if there is no unrecorded portion, to the end of the tape).
AC adaptor
to a wall outlet