Sony DSR-11 Mode D'emploi page 33

Notes
• The unit cannot search for a signal for index search or an unrecorded
portion within 20 seconds of the beginning of the playback.
• While a tape is running, be sure not to turn off the power by using an AC
timer. The unit and the tape may be damaged. When turning off the
power of the unit, make sure to press the STOP button on this unit first to
stop the tape transport, then turn off the power.
To stop Auto Repeat
Press the STOP button on this unit.
To release the Auto Repeat mode
Set the AUTO REPEAT switch on the rear panel to OFF.
Chapter 2 Playback and Recording
33
(GB)