Recording; Connections For Recording - Sony DSR-11 Mode D'emploi

Recording

Recording

Connections for Recording

To equipment with a DV jack
34
(GB) Chapter 2 Playback and Recording
This section describes the necessary connections, settings and operations
to perform recording on this unit. The same settings and operations apply
whether you are using the unit for dubbing or as a stand-alone recorder.
Connecting to a computer
The video and audio signals are sent from a computer with virtually no
deterioration in quality, enabling high-quality downloading. The signal
flow is automatically detected so you do not need to make separate
connections for input and output.
Player
Computer
to the
DV jack
i.LINK cable (DV cable) (not supplied)
Notes
• With the DV connection, data codes (recording date/time, camera data)
are transmitted from the computer (player). However, the contents of the
cassette memory are not transmitted.
• If no picture appears via the DV jack, disconnect, then reconnect the
i.LINK cable (DV cable).
Recorder
Monitor
DSR-11
l: Signal flow