Supplied Remote Commander - Sony DSR-11 Mode D'emploi

Supplied Remote Commander

1 TC RESET button
2 SEARCH SELECT
buttons
3 Buttons for
playing at various
speeds
4 PAUSE button
5 PLAY button
6 REW button
1 TC RESET button
Press this button to reset the time code to 00:00:00:00
during recording or in the recording pause mode.
Notes
• When the command mode of a Sony device / remote
commander is set to VTR 4;
– if you press this button while pointing the Remote
Commander toward a Sony device other than this
unit, the HMS counter on that machine will be reset
to zero.
– if you press a counter reset button on a Sony
remote commander while pointing it toward this
unit during recording or in the recording pause
mode, the time code will be reset to zero.
• This button functions only when the unit or other
Sony device is recording in the DVCAM format.
7 On/standby switch
TC RESET
DISPLAY
8 DISPLAY button
DATA CODE
9 DATA CODE button
SEARCH SELECT
MENU
0 Buttons for menu operation
SET
x1/10 x1/3 x1 x2
FRAME
PAUSE REC
qa REC buttons
qs FF button
PLAY
REW FF
STOP
qd STOP button
2 SEARCH SELECT buttons
Press these buttons to search for scenes using the
search function.
For details on the search function, see "Searching using the
search function" on page 29 (GB).
3 Buttons for playing at various speeds
You can play back a tape at normal speed or at a speed
other than normal with these buttons.
For details, see "Playing at various speeds" on page 28
(GB).
4 PAUSE button
5 PLAY button
13
Chapter 1 Overview (GB)