Sony DSR-11 Mode D'emploi page 45

Submenu
Icon/Menu
(page)
AUDIO SET
JOG AUDIO
A
AUDIO MIX
(page 23 (GB))
DISPLAY SET menu
Submenu
Icon/Menu
(page)
DISPLAY
qREMAIN
DISP
SET (page 27 (GB))
DATA CODE
(page 25 (GB))
COLOR BAR
(for NTSC model) /
COLOUR BAR
(for PAL model)
DATE DISP
TIME DISP
Setting
Turns sound output on/off when the tape is played at a speed other than normal.
OFF : Does not output the sound when playing a tape at a speed other than normal.
ON: Outputs the sound when playing a tape at a speed other than normal.
Note
Even if you have set this item to ON, the sound may not be output or may be interrupted
depending on the recording format or tape conditions.
Adjust the balance of the analog audio output level between channels 1/2 and channels 3/4
during playback.
Press the M/m buttons to move the bar, then press the SET button.
CH1 CH3
2 4
Setting
Selects whether or not to display the tape remaining time on the analog video output.
ON : Displays the tape remaining time.
OFF: Does not display the tape remaining time.
Selects whether or not to display the data codes on the analog video output.
OFF : Does not display the data codes.
DATE: Displays the date and time when recorded.
CAMERA: Displays the camera data.
Selects whether or not to display the color bars.
OFF : Does not display the color bars.
ON: Displays the color bars.
Notes
• You cannot display the color bars while the unit is playing the tape or when the INPUT
SELECT selector is set to DV.
• The color bars are displayed only on the analog video output.
• If you record when the color bars are displayed, the color bars will also be recorded on
the tape.
• Do not use the color bars output from the OUTPUT jacks as a reference signal.
• The reference sound signals are not output even if this item is set to ON.
• This item will be automatically set to OFF if you set the INPUT SELECT selector to DV or
you operate the tape transport control that display the pictures recorded on the tape.
Selects the date display in the search screen, the data code display and so on.
Y/M/D: Displays YY/MM/DD (year/month/day).
M/D/Y: Displays MM/DD/YY (month/day/year).
D/M/Y: Displays DD/MM/YY (day/month/year).
Note
The default is M/D/Y for the NTSC model; D/M/Y for the PAL model.
Selects the time display in the search screen, the data code display and so on.
24H : Displays 24-hour time.
12H: Displays 12-hour time.
Chapter 3 Adjusting and Setting Through Menus
45
(GB)