koban KPAW-01 Manuel page 149

KPAW-01
TRUE RMS 1000A AC WATT Clamp Meter
Press ▲ as figure 14 to step through in sequence three
phase sum of active power+three phase sum of reacitve
power, and three phase sum of power factor + 3 phase sum
of apparent power.
Press ∑ and hold for 1seconds again back to the normal
measuring mode.
In figure 6 ∑W = W1 + W2 + W3.
When measuring 3 phase 3 wires, Hold SEL for 5
seconds and the Meter show
seconds to exit 3 phase 3 wires ,connecting the Meter as
figure 15.
24
Figure 14
, press SEL again for 5
www.grupotemper.com