koban KPAW-01 Manuel page 129

KPAW-01
TRUE RMS 1000A AC WATT Clamp Meter
In this manual, a Warning identifies conditions and actions
that pose hazards to the user, or may damage the Meter or
the equipment under test.
A Note identifies the information that user should pay
attention to.
Rules For Safe Operation
Warning
To avoid possible electric shock or personal injury,
and to avoid possible damage to the Meter or to the
equipment under test, adhere to the following rules:
Before using the Meter inspect the case. Do not use the
Meter if it is damaged or the case (or part of the case) is
removed. Look for cracks or missing plastic. Pay attention to
the insulation around the connectors.
Inspect the test leads for damaged insulation or
exposed metal. Replace damaged test leads with identical
model number or electrical specifications before using the
Meter.
Do not apply more that the rated voltage, as marked on
the Meter.
When measurement has been completed, disconnect
the connection between the test leads and the circuit under
test, remove the
esting leads away from the input terminals of the Meter and
turn the Meter power off.
Do not carry out the measurement when the Meter's
4 www.grupotemper.com