WERTHER INTERNATIONAL MM25 Manuel D'instructions Pour L'installation, L'utilisation Et L'entretien page 14

Table des Matières

Publicité

Fig. 2 - Abb.2
12
CAP.2
SPECIFICHE TECNICHE
DATI TECNICI:
Funzionamento ..................................................elettro-idraulico
Portata ................................................................2500 Kg
Tempo di salita ...................................................25
Tempo di discesa................................................45
Rumorosità..........................................................<
Peso totale ..........................................................circa 700 Kg
Temperatura di funzionamento ...........................-10°C / +50°C
Ambiente di lavoro: locale chiuso.
Il senso di rotazione del motore è sinistro, cioè antiorario, come indicato
dalla targhetta sul motore stesso.
MOTORE ELETTRICO
Tipo ...........................................................C90
Potenza .....................................................2.2 Kw
Tensione....................................................230-400 V trif. +/- 5%
Frequenza .................................................50 Hz
N° poli........................................................4
Velocità .....................................................1400 giri/1'
Forma costruttiva.......................................B14
Classe isolamento .....................................F
Assorbimento: ...........................................230V: 10,7A
..................................................................400V: 6,2A
Il collegamento del motore deve essere eseguito riferendosi agli schemi
elettrici allegati. Il senso di rotazione del motore è sinistro (antiorario)
come indicato nella targhetta applicata sul motore stesso.
POMPA:
Tipo ...........................................................AP100/5
Cilindrata ...................................................6,1 cm3/g
Valvola di max. tarata a .............................160 bar
OLIO
Il serbatoio dell'olio contiene oilio idraulico a base minerale secondo
normativa ISO/DIN 6743/4 con grado di contaminazione non superiore
alla classe 18/15 secondo normativa ISO 4406 come IP HYDRO OIL
32; SHELL TELLUS T 37 o equivalenti.
CHAPTER 2
TECHNICAL DATA:
Operation...................................................electro-hydraulic
Carrying Capacity......................................2500 kg
sec.
Lifting time .................................................25
sec.
Lowering time ............................................45
74 db
Noisy level
.................................................<
Weight .......................................................700 kg. approx.
Working temperature.................................-10°C / +50°C
Installation requirements: enclosed area.
The motor rotates towards left, i.e. its rotation is counterclockwise , as
shown in the label placed on the motor.
MOTOR
Type ..........................................................C90
Power ........................................................2,2 Kw
Voltage ......................................................230-400V th.-ph +/-5%
Frequency .................................................50 Hz
Poles .........................................................4
Speed ........................................................1400 rpm
Building shape...........................................B14
Isulation class............................................F
Absorption: ................................................2230V: 10,7A
..................................................................400V: 6,2A
When connecting the motor refer to the enclosed wiring diagrams.
The motor has left-handed rotation (counter-clockwise) as shown on the
data plate on the casing.
PUMP:
Type ..........................................................AP100/5
Displacement ............................................6,1 cm3/g
Relief valve:...............................................160 bar
OIL
The hydraulic oil tank is filled with mineral oil according to ISO/DIN
6743/4, contamination category no higher than class 18/15 according to
ISO 4406, such as IP HYDRO OIL 32; SHELL TELLUS T 37 or an equi-
valent oil.
SPECIFICATIONS
sec.
sec.
74 db

Publicité

Table des Matières
loading

Table des Matières