Transport; General Warnings; Packaging Contents - Ultraflex UC 128-TS Manuel D'installation Et D'entretien

ULTRAFLEX

2 TRANSPORT

2.1 General warnings

The product weight with its packaging is 8kg (18 pounds) and so it can be handled manually.
WARNING
The staff in charge of handling must operate with protective gloves and safety shoes.

2.2 Packaging contents

Before using the equipment check that the product has not been damaged during transport.
Also make sure that all the standard components are in the packaging (see list). In case of damage,
notify the claim to the forwarder and inform the supplier.
C
CAUTION
The packaging must be disposed of according to the existing laws.
page 10
of 78 -
HYDRAULIC CYLINDER FOR OUTBOARD ENGINE
B
D
CONTENTS OF THE STANDARD PACKAGING:
A ) No.1 cylinder body with rod, fittings and bull horns;
B ) No.1 link arm kit composed of:
- No.1 link arm;
- No.2 allen screws with No.1 safety screw and
lock washer;
- No.1 bolt + nut;
E-F
-
C ) No. 1 spacer kit composed of:
- No.8 plastic spacers;
- No.2 steel spacers;
- No.1 ring nut for adjustement collar;
D ) No.2 caps for the cylinder body;
E ) No.2 bolts + No.2 lock washers;
F ) No.2 locknuts + n°2 washers;
Installation and Maintenance Manual
No.1 kit for Suzuki engines (not TS/3 version);
A