Introduction - WERTHER INTERNATIONAL 253/3 Manuel D'instructions Pour L'utilisation

Table des Matières

Publicité

6
STOCCAGGIO
Gli imballi devono sempre essere conservati in luoghi coperti e protetti
a temperature comprese fra -10°C e +40°C. e non devono essere espo-
sti ai raggi diretti del sole.
IMPILAMENTO DEI PACCHI.
Il tipo di imballo previsto prevede la possibilità di impilare in magazzino
fino ad 8 gabbie una sull'altra, purchè vengano correttamente disposte
ed assicurate contro la caduta.
Nei cassoni dei camion o nei containers si possono impilare fino a 3
gabbie,
purchè vengano reggiate bene ed assicurate contro la ca-
duta.
APERTURA DEGLI IMBALLI
All'arrivo verificare che la macchina non abbia subito danni durante il
trasporto e che ci siano tutti i pezzi indicati nella lista di spedizione.
Le gabbie devono essere aperte adottando tutte le precauzioni per evi-
tare danni alle e ai pezzi della macchina (evitare cadute di pezzi dalla
gabbia durante l'apertura).
ELIMINAZIONE DELL'IMBALLO.
Il legno della gabbia può essere riutilizzato o riciclato.
INTRODUZIONE
I
ATTENZIONE
Questo manuale è stato scritto per il personale di officina addetto
all'uso del sollevatore (operatore) e per il tecnico addetto alla ma-
nutenzione ordinaria (manutentore) pertanto, prima di effettuare
qualsiasi operazione sul sollevatore e/o sul suo imballaggio, oc-
corre leggere attentamente tutto il manuale, poichè esso contiene
informazioni importanti per:
- LA SICUREZZA DELLE PERSONE addette all'uso ed alla manu-
tenzione ordinaria,
- LA SICUREZZA DEL SOLLEVATORE,
- LA SICUREZZA DEI VEICOLI sollevati.
CONSERVAZIONE DEL MANUALE
Il manuale è parte integrante del sollevatore e deve sempre accom-
pagnarlo, anche in caso di vendita.
Esso deve sempre essere conservato in vicinanza del sollevatore, in
luogo facilmente accessibile.
L'operatore ed il manutentore devono poterlo reperire e consultare rapi-
damente in qualsiasi momento.
STORAGE
Packed machinery must always be kept in a covered, protected place,
at a temperature between -10 °C e + 40°C, and must not be exposed to
direct sunlight.
CRATE STACKING.
The type of packing allows the possibility of stacking up to 8 crates.
Up to 3 crates may be stacked one upon the other on lorries or in con-
tainers
if properly positioned and provided they are restrained to
prevent
falling.
OPENING THE CRATES
When the crates arrive, check that the machine has not been damaged
during transport and that all parts listed are present.
The crates must be opened using all possible precautionary measures
to avoid damaging the machine or its parts. Make sure that parts do not
fall from the crate during opening.
DISPOSAL OF CRATES
The wood of the crates may be re-used or recycled.

INTRODUCTION

I
WARNING
This manual has been prepared for workshop personnel expert in
the use of the lift (operator) and technicians responsible for routi-
ne maintenance (maintenance fitter); read the manual before car-
rying out any operation with the lift and/or the packing. This ma-
nual contains important information regarding:
- THE PERSONAL SAFETY of operators and maintenance workers,
- LIFT SAFETY,
- THE SAFETY OF LIFTED VEHICLES
CONSERVING THE MANUAL
The manual is an integral part of the lift , which it should always
accompany , even if the unit is sold.
The manual must be kept in the vicinity of the lift, in an easily accessib-
le place.
The operator and maintenance staff must be able to locate and consult
the manual quickly and at any time.

Publicité

Table des Matières
loading

Table des Matières