Microcontrolled Dosing Pumps Exactus Vft/Mbb Series; Pump Controls; Typical Installation; Accessories - Astralpool EXACTUS Série Notice D'installation, Emploi Et Entretien

9.0 - MICROCONTROLLED DOSING PUMPS EXACTUS VFT/MBB SERIES

The pump is equipped with a modern microcontroller allowing design of a extremely compact and reliable
electronic device.
9.1 - PUMP CONTROLS (Fig. 18)
1 - Increasing values button
2 - ON/STAND BY button
3 - Decreasing values button
4 - "green" LED 1:N function
5 - "green" LED 1XN (M) function/water meter
6 - "green" LED 1XN function/ manual mode
7 - "red" LED injection pulse flashing
8 - "green/red" LED pump fed/stand by
9 - 7 segment display
10 - function selection button
9.2 - TYPICAL INSTALLATION (Fig.19)
A Injection valve
B
Power supply
C Filter
D Level probe
I Chemical tank
K Pulse emitting water meter
S Process tank

9.3 - ACCESSORIES

• 1 flexible PVC suction hose,
transparent crystal type, length 2 m;
• 1 semirigid polyethylene hose, white, length 2 m;
• 1 injection valve 3/8 BSP m;
• 1 filter;
• 1 instructions/operating booklet.

9.4 - LEVEL CONTROL

The dosing pump is supplied with level
control setting. When the chemical tank is
empty, on display (9) it
pump goes in stand by. The level control has
5 seconds of delay.
EXACTUS VFT/MBB
appears AL1 and the
• 3 3 •
Fig. 18
Fig. 19