Summary Of Personal Protection Equipment (Ppe) To Be Used During All Of The Machine's Operating Phases - MASCHIO GASPARDO PINOCCHIO 130 Mode D'emploi Et Entretien

ENGLISH
2.1 SUMMARY OF PERSONAL PROTECTION
EQUIPMENT (PPE) TO BE USED DURING ALL
OF THE MACHINE'S OPERATING PHASES
Trasport
Movement
Installation and settings
Alignment, adjustment,dragging
(hauling)
Regular use
Control
Lubrication
Maintenance
Cleaning
Shut down
Unmounting
Demolition
Disposal
The following table summarises the PPEs (Personal Protection
Equipment) to be used during the various operating phases of the
machine (for each phase the use and/or placing at the worker's
disposal of the PPEs is mandatory).
The PPEs used must be CE marked and respond to EEC Directive
Life-span of the equipment
Transport
Moving
Installation and assembling
Adjustment
Use
Control
Greasing
Incorrect use
Maintenance
Cleaning
Shutting down
Dismantling
Demolition
Dismantling
30
USE AND MAINTENANCE
Phase
Explanations:
Provides the transfer of the equipment from one place to another by means of a suitable
vehicle.
Provides for the transfer of the equipment from and into the transporting vehicle for
movements not including road transport.
Provides for all the assembling operations that preliminarily prepare the equipment for
setup.
Provides for the adjustment, setting up and calibration of all those devices that need to be
adapted to the operating conditions normally provided for and which cannot be securely
fixed during assembling operations.
Use for which the equipment is designated in conformity with the instructions provided
by the manufacturer or considered usual on the basis of its design, construction and
function.
Consists in the check up of the equipment's functions.
Provides for the lubrication or greasing of the mobile parts such as bearings, slides, shafts
etc.
Use resulting from involuntary negligence and not from a deliberate intention to use the
equipment improperly.
Consisting in the periodical checking of the equipment that are subject to wear or that
may require replacing.
Consists in the removal of dust and cultivation residue that could jeopardise the
performance and use of the equipment, as well as the health/safety of the operator.
Provides for the disassembling of the equipment from the tractor after work has been
completed.
Consists in the complete or partial disassembling of the equipment, to allow possible
recycling or segregated waste collection of the components according to the provisions
laid down by the laws currently in force.
Consists in the definitive removal of all the parts of the equipment resulting from the
demolition operation.
Operation consisting in the dismantling of products/substances contained in the
equipment.
Safety Safety Gloves
overalls shoes
DPI ENVISAGED
DPI AVAILABLE FOR USE OR IF NECESSARY
DPI CONTINGENCIES
89/686, transposed in Italian law with Legislative Decree D. Lgs.
475/92 and subsequent revisions.
Responsibility for identifying and selecting the type and category
of PPE.
The following table lists the machine life phases.
Description
Glasses Mask
Example and mentions
e.g.: use of vehicle on road, rails, etc.
e.g.: use of bridge cranes or special
cranes, forklift trucks, etc.
e.g.: mechanical assemblies, auxiliary
circuits, etc.
e.g.: adjustment of mechanical parts,
relative alignments, etc.
e.g.: the verification of the correct
functionality of the safety devices, etc.
e.g.: the use of the equipment without
complying with the provisions of the
manual, the operators fail to use the DPI,
etc.
e.g.: tines, bolts, bearings, etc.
e.g.: removal of residue buildup from the
hook-up points of the tines and from the
rear rollers
These parts shall be disposed of,
scrupulously following the provisions laid
down in the legislation in force.
cod. F07011399