Graef DA 506 Mode D'emploi page 26

Insert the plug into the
●
socket.
Press "+" or "-" in
●
order to increase or
decrease the number
of hours. (Maximum 40
hours)
Then press the
●
"START" button, the
temperature display
will then flash.
Having done the settings, press again the START button. The green lamp illumi-
●
nates and the dehydrating process will start.
After completion of the dehydrating process (timer shows 00.00), switch off
●
the unit.
26
Switch the unit on. The
●
timer is on 00:00 and
the temperature on
50°C.
Then press the
●
"START" button, the
minute display will then
flash.
Press "+" or "-" in
●
order to increase or
decrease the tempera-
ture.
Keep holding the
●
"START" button for
approx. 3 seconds until
the hour display flashes
up.
Press "+" or "-" in
●
order to increase or
decrease the number
of minutes.
To confirm, press the
●
START button again.