Filter And Wash Arm Maintenance; Preparing The Unit For Shipping - SciCan HYDRIM L110w G4 Manuel De L'utilisateur

6. Care and Maintenance

6.4 Filter and Wash Arm Maintenance

Filter

6.5 Preparing the unit for shipping

If preparing the unit for transport or storage, waste water should be removed from the
sump. Waste water in the unit may contain biological contaminants. From the Setup menu,
select the Prepare for Shipping function.
Use a mechanical means or absorbent material to siphon the contents from the sump.
Wear disposable rubber gloves. Dispose of absorbent material according to biological
waste disposal regulations.
Filter Maintenance:
Inspect the filter in the bottom of the
chamber daily for debris and clean if
necessary. To clean, remove the filter,
rinse under a tap and replace. Ensure
that the filter is firmly locked into position
when replaced.
Wash arms
Wash Arm Maintenance:
If the wash arms are not turning
easily, remove them, rinse under a tap
and reassemble. To remove the upper
or middle arm, unscrew the collar
counterclockwise. To remove the lower
arm unscrew the collar clockwise.
33