SciCan HYDRIM L110w G4 Manuel De L'utilisateur page 30

5. Instructions for Use –
Retrieving cycle information using the USB data back up
The USB storage device can be used to transfer cycle information stored in the unit to
a computer. Best practice suggests this should be done once a week. To transfer data
using the USB port, follow these steps:
1. Plug the USB storage device into the USB port.
2. The HYDRIM keeps track of what data has already been transferred to the USB
storage device and will automatically load only new data. Data stored in the internal
memory of the HYDRIM can be copied once only. Access to previously transferred
information can be made from the web portal.
3. When the activity light on your USB storage device stops blinking or the USB icon
on the LCD turns from a flashing green to a solid grey, remove the USB storage
device and transfer the information to your computer.
NOTE: If you select the USB storage device icon from the main menu, you will only be
able to view the last five complete cycles and the last five incomplete cycles. To view all
the cycles stored on the USB storage device, you must use your computer.
NOTE: If you lose your USB storage device and would like to transfer your unit's cycle
history to a new device, follow these steps:
1. Plug the new USB storage device into the USB port.
2. Select the USB icon.
3. From the cycle information screen, select the USB icon again.
4. Select Copy and the unit will copy all cycle information to the USB storage device.
28