Turning The Button Sound On Or Off; Adjusting The Button Beep Volume - SciCan HYDRIM L110w G4 Manuel De L'utilisateur

5. Instructions for Use

5.15 Turning the button sound ON or OFF

The HYDRIM is preset to beep when a button is pressed. If you would like to turn the button
sound off, follow these steps:
NOTE: Turning OFF the button sound does NOT turn off other alarms and cycle notification
beeps.
1.
2.
Scroll to
3.
Use
Press

5.16 Adjusting the button beep volume

If you would like to adjust the beep volume, follow these steps:
1.
2.
Scroll to
3.
Use
pressing it. Press
5.17 Adjusting the salt regeneration
Salt regeneration should be set according to the local water hardness. See section 4
Testing Water Quality for instructions on determining correct settings. To set salt
regeneration, follow these steps:
1.
2.
Scroll to
3.
Use
to the Setup menu.
Beep ON/OFF
and select.
to scroll through your ON or OFF options and select it by pressing it.
to save and move back to the Setup menu.
Beep Volume
and select.
to scroll through the volume settings. Select the one you want by
to save and move back to the Setup menu.
Set Regeneration
and select.
to change the value. The default setting is 1. Press
19
to save and return