Instructions For Use; Recommendations - SciCan HYDRIM L110w G4 Manuel De L'utilisateur

5. Instructions for Use

5.1 Instrument Reprocessing Recommendations
The HYDRIM L110w G4 is designed to clean general dental and medical instruments.
Terminal sterilization MUST follow processing in the HYDRIM L110w G4.
Prior to placing instruments in the HYDRIM, consult the instrument manufacturer's reprocessing
instructions.
Examples of medical and dental instruments suitable for cleaning in the HYDRIM L110w G4
include:
• Stainless steel scalers, spatulas and hemostats.
• Stainless steel retractors, needle holders, skin hooks, tissue forceps, scissors, curettes, and
other stainless steel instruments free of deep cavities.
For best results, instruments processed in the HYDRIM L110w G4 should
have the following properties:
• Heat resistance to a temperature of up to 70°C / 158°F
• Corrosion resistance in the presence of heat and alkalinity.
Burs, microkeratomes, phaco tubing, fiberoptics and electrical equipment should not be processed
in the HYDRIM.
Nickel-plated instruments, or instruments containing aluminum or colour anodized aluminum
as well as single use instruments are not suited for processing in the HYDRIM.
HIP™ (HYDRIM Cleaning Solution with Instrument Protection) has been carefully formulated to
provide outstanding material compatibility with a wide range of metals and coatings. However,
some manufacturers' instruments or instrument coatings may not be compatible.
Please consult the instrument manufacturer for their recommended cleaning procedures.
In general, it is not recommended to process carbon steel and chrome plated instruments
in the HYDRIM.
All hinged instruments should be placed in open position in open baskets or in the hinged
instrument rack (SciCan part number 01-110409S) in P3 Heavy-Duty cycle.
When processing small or light objects in the HYDRIM use the basket with lid (SciCan part number
01-109966S).
Only the outer surfaces of dental handpieces can be cleaned in the HYDRIM L110w G4 with
the handpiece holder (9 handpieces, PN 01-113113S or 21 Handpieces, PN 01-113112S).
Set-able materials, such as cements, amalgam, and composites need to be removed from the
instruments after use at chairside. The HYDRIM will not be able to clean them off the instruments.
.
9