SciCan HYDRIM L110w G4 Manuel De L'utilisateur page 33

6. Care and Maintenance
Connect new container and insert into the cleaning solution compartment.
5.
Follow the instructions printed on each cleaning solution container.
Close the door.
6.
Turn the power switch ON
7.
To prime the cleaning solution dosing pump, press the water softener/detergent icon
on the main screen. In the water softener/detergent screen, press the red X next to
"Detergent". The unit will prime the dosing system and a green check mark will appear in
place of the red X when it is ready for use.
NOTE: The system can also be primed by simply starting a cycle and selecting "Detergent
Replaced", when prompted.
31