Storage - SilverCrest SMZC 500 B2 Mode D'emploi

1) Remove the power plug from the socket.
2) Dismantle the appliance for cleaning. Pull the sealing ring
Remove the small rubber disc located on the upper end of the blade holder
3) Clean the motor unit
gent onto the cloth. Wipe off with a cloth moistened only with clear water so
that all detergent residues are removed.
4) Clean the bowl
with blade
ring
clean water to remove any detergent residues. Dry all parts well.
NOTE
► Alternatively, you can clean the bowl
with blade
possible, place the parts in the top basket of the dishwasher. Ensure that
the parts are not trapped in any way.
5) After cleaning, push the sealing ring
Ensure that the flat side of the sealing ring
6) Place the small rubber ring back on the upper end of the blade holder
You can now reassemble the appliance.

Storage

■ Store the cleaned appliance in a clean and dry location.
■ 28
│ GB│IE
with a moist cloth. If necessary, add a little mild deter-
, emulsifying disc
, the small rubber disc of the blade holder
in warm water with a little mild detergent. Rinse all the parts using
and the lid
, lid sealing ring
, emulsifying disc
with the sealing ring
back onto the flange of the lid
rests flat on the lid
off the lid .
.
, blade holder
and the non-slip
, blade holder
in the dishwasher. If
.
.
.
SMZC 500 B2