Storage; Troubleshooting - SilverCrest SMZCD 400 A1 Mode D'emploi

CAUTION - PROPERTY DAMAGE!
Do not clean the motor unit 2, the appliance base 8 and the sealing
►
ring 4 in a dishwasher, as this would damage them.
► Do not use abrasive or aggressive cleaning materials. These could attack
the upper surfaces and irreparably damage the appliance.
■ Remove the plug from the mains power socket.
Clean the motor unit 2 with a moist cloth. Dry it well.
■
Remove the sealing ring 4 from the lid 3 and release the appliance base 8
■
from the bowl 7.
The bowl 7, the lid 3 and the blade holder with the blade 6 are dish-
■
washer safe.
Clean the sealing ring 4 and the appliance base 8 in water and add a mild
■
detergent. Afterwards, rinse all parts with clean water so that no detergent
residues remain. Ensure that everything is dryed thoroughly before reassem-
bling the appliance.

Storage

■ Clean the appliance as described in the section "Cleaning and care".
■ Store the appliance in a dry and clean location.

Troubleshooting

Problem
The appliance
does not function.
SMZCD 400 A1
Cause
The plug is not inserted into
a mains power socket.
The mains power socket
is defective.
The appliance is defective.
Remedy
Insert the plug into a
mains power socket.
Try another mains power
socket.
In this case, contact
Customer Services.
GB
33