Cleaning And Care - SilverCrest SMZCD 400 A1 Mode D'emploi

GB

Cleaning and care

32
14) Carefully pull the blade holder with the blade 6 out of the bowl 7.
15) Remove the contents.
NOTICE
Due to the grinding of hard and abrasive foodstuff s, the bowl 7 can take
►
on a dull appearance over time. This is normal and does not infl uence the
functioning of the appliance.
NOTICE
You can use the appliance base 8, after the processing of the foods has
►
been completed, as a lid for the bowl 7, to help keep the food fresh for
longer.
Take the motor unit 2 and lid 3 off of the bowl 7.
►
The blade holder 5 with the blade 6 can, if you wish, remain in the
►
bowl 7.
Disconnect the appliance base 8 from the underside of the bowl 7. You
►
can now place the appliance base 8 on the bowl 7 and press it in the
middle so that it closes the bowl 7.
DANGER - RISK OF ELECTRICAL SHOCK!
► Before cleaning, ALWAYS remove the plug from the mains power socket!
There is the risk of receiving an electric shock!
► Do not open any part of the housing. There are no user-serviceable elements
inside. An open housing can create the risk of a lethal electrical shock.
NEVER submerse the appliance in water or other liquids! This would
increase the risk of a potentially fatal electric shock should liquids
come into contact with power carrying components.
WARNING - RISK OF INJURY!
► To prevent injuries, exercise caution when handling the extremely sharp
blade 6. Reassemble the Universal Food Processor after using and/or
cleaning it so that you do not injure yourself on the exposed blade 6.
Keep the blade 6 out of the reach of children.
SMZCD 400 A1